The Innokin Endura T18 II is a pen-style starter kit built specifically for mouth-to-lung vaping. It is one of the most recommended first vape devices in the UK, and for good reason — it is simple, reliable and produces a draw that genuinely resembles the experience of smoking a cigarette.
About the Innokin Endura T18 II
Innokin designed the T18 II around the Prism T18 coil platform, which has been refined over several generations. The 1.5 ohm Kanthal coil operates at 10.5W, 12W or 13.5W — three wattage levels selectable by pressing the fire button three times. Most new vapers find 12W or 13.5W the most satisfying starting point. The airflow is adjustable and fully closeable, which lets you tighten the draw to something very close to the resistance of a cigarette, or open it slightly for a less restrictive hit.
The 1300mAh built-in battery is a genuine improvement over the original T18's 1000mAh cell. For moderate vapers — three to four sessions per day — it typically lasts a full day without needing a charge. Charging is via the 510 thread connection on the base using the included cable. The kit comes with two pre-installed and one spare coil, so you have enough coils for the first three to four weeks before needing replacements.
The tank holds 2ml of e-liquid with a TPD-compliant 2.5ml version available in some markets. Top-fill access via a sliding top cap keeps refilling clean. The magnetic mouthpiece cap clips to the base of the device while vaping and keeps the drip tip hygienic during storage. The body is stainless steel and available in five colours. At Φ18 x 145mm it fits comfortably in most pockets and is light enough not to feel intrusive.
Endura T18II Specifications
Dimensions: Φ18 x 145mm
Battery: 1300mAh built-in
Output: 10.5W, 12W, 13.5W (selectable)
Tank capacity: 2ml (top-fill)
Coil: 1.5 ohm Prism T18 Kanthal
Charging: 510-thread base connection
Thread: 510 (tank)
Draw style: Mouth-to-lung
What's in the Box
1 x Innokin Endura T18 II Device
1 x T18 II Tank (with 1.5Ω coil pre-installed)
1 x Spare 1.5Ω Prism T18 Coil
1 x Charging Cable
1 x Magnetic Mouthpiece Cap
1 x User Manual
Resistance and Wattage Guide
The 1.5 ohm coil runs at three fixed wattage levels. Start at 10.5W if you prefer a cooler, lighter draw, or go straight to 13.5W if you are a heavier smoker who needs a warmer, more substantial hit. 12W is a good middle ground for most people. The T18 II is not compatible with coils below 1.2 ohm — the resistance range is 1.2 to 3.9 ohm, which keeps it firmly in MTL territory. Replacement coils are the T18 and T22 Prism platform.
Works with
Innokin Endura T18II Kit
